Thrane & Thrane Explorer™ 300
Technical Specifications
| General | Environmental Conditions |
|
Max. IP data rate* Rx: 384kbps Tx: 240kbps Streaming IP (guaranteed bandwidth): 32, 64kbps |
Operating temperature: -25°C to +55°C -13°F to +131°F |
|
Weight (incl. battery): 1.4kg/3.1lbs |
Storage temperature: -40°C to +80°C (excl. battery) -40°F to +176°F (excl. battery) |
|
Size: H: 16.8cm/6.6inches W: 21.7cm/8.5inches D: 5.2cm/2.1inches |
Battery storage temperature: 1 month: -20°C to +60°C / -4°F to +140°F ambient 3 months: -20°C to +45°C / -4°F to +113°F ambient 1 year: -20°C to +20°C / -4°F to +68°F ambient |
|
LCD display: Graphical high resolution Back lit 2 x 16 characters in text mode |
Relative humidity: 95% non-condensing at +40°C/+104°F |
|
User interface: Four navigation keys and power button Audio and LCD pointing aids LED indicators Launch pad and web configuration |
Robustness: 0.5 m/1.64 ft drop on concrete (operational, 95% survival) |
|
Battery: Lithium ion (rechargeable) Stand-by time: 36h, 0°C to +55°C/+32°F to +131°F Standard call 1): 3h, 0°C to +55°C/+32°F to +131°F Rx time, max.: 3h30m @ 64kbps, 0°C to +55°C/+32°F to +131°F Tx time, max.: 1h20 @ 96kbps, 0°C to +55°C/+32°F to +131°F Min. charge cycles: 300 Recharge time: <3h Charge temperature: 0°C to +45°C/+32°F to +113°F |
Water & dust: IP-54 (dust and spray proof in all directions) |
|
Frequencies Inmarsat Rx: 1525.0 – 1559.0MHz Tx: 1626.5 – 1660.5MHz Frequencies GPS: 1575.42MHz |
|
|
EIRP: 10dBW ±1dB |
| Power | LAN Interface | Bluetooth Interface |
|
DC input range: 10-16VDC |
Connector type: RJ-45, MDI-X |
Version: 1.2 |
|
Power consumption* Standby mode: 0.8W (typical) Transmit mode: 14W (typical) During charging: 38W (max.) |
Standard: ISO/IEC 8877:1992. and IEEE 802.3 1998 edition |
Antenna: Integrated in transceiver unit |
|
Connector type: 2.5mm EIAJ RC-5320-IV |
Max. cable length: 100m/328ft (Cat5 UTP) |
Max. coverage* Outdoor: 25m/82ft |
|
AC/DC power supply Input: 100-240VAC, 47-63Hz, 50W Output: 15VDC |
Data rate: 10/100Mbps |
Max. devices connected: 1 handset, 1 PC/PDA |
|
Built-in Bluetooth handset charger: 6.2VDC, 350mA |
Profiles supported: Cordless handset, serial port, service discovery application, dial-up networking, headset |
|
|
Frequencies: 2400.0 – 2483.5MHz |
| Certifications | Analogue Phone Interface | Accessories |
|
CE FCC GMPCS |
Connector type: RJ-11 |
Package EXPLORER™ 300 incl. lithium ion battery (rechargeable) LAN cable 100-240VAC power supply Getting Started kit |
1) With either Bluetooth or phone interface
* Performance depends on a wide range of factors and actual usage.
Datasheet (.pdf) [165 KB]