Thrane & Thrane Explorer™ 700
Technical Specifications
| General | Environmental Conditions |
|
Max. IP data rate Rx/Tx:* 492kbps/492kbps (simultaneously) Streaming IP: 32, 64, 128, 256kbps |
Operating temperature: -25°C to +55°C -13°F to +131°F |
|
Weight (incl. battery): Total (incl. battery): 3.2kg/7.0lbs Antenna: 1.7kg/3.7lbs Transceiver (incl. battery): 1.5kg/3.3lbs |
Storage temperature: -40°C to +80°C (excl. battery) -40°F to +176°F (excl. battery) |
|
Size Total: H: 29.0cm/W: 39.9cm/D: 5.1cm H: 11.3inches/W: 15.6inches/D: 2.0inches Size Antenna: H: 29.0cm/W: 39.9cm/ D: 5.1cm H: 11.3inches/W: 15.6inches/D: 2.0inches Size Transceiver: H: 28.0cm/W: 22.8cm/D: 4.0cm H: 10.9inches/W: 8.9inches/ D: 1.6inches |
Battery storage temperature: 1 month: -20°C to +60°C/-4°F to +140°F 3 months: -20°C to +45°C/-4°F to +113°F 1 year: -20°C to +20°C/-4°F to +68°F |
|
LCD display: Graphical high resolution Back lit 2 x 16 characters in text mode |
Relative humidity: 95% non-condensing at +40°C/+104°F |
|
MMI: Four navigation keys and power button Audio and LCD pointing aids LED indicators Launch pad and web configuration |
Robustness: 0.5 m/1.64 ft drop on concrete (operational, 95% survival) |
|
Battery: Lithium ion (rechargeable) Stand-by time: 36h, 25°C/77°F Tx time, max.: 2h30m @ 144kbps (158MB), 25°C/77°F 1h30m @ 492kbps (324MB), 25°C/77°F Rx time, max.: 3h30m @ 492kbps (756MB), 25°C/77°F Min. charge cycles: 300 Recharge time: 2h30m Charge temperature: 0°C to +45°C/32°F to +113°F |
Water & dust: Transceiver: IP-52 Antenna: IP-66 |
|
Frequencies Inmarsat: Rx: 1525.0 – 1559.0MHz Tx: 1626.5 – 1660.5MHz Frequencies GPS: 1575.42MHz |
|
|
EIRP: 20dBW ±1dB |
| Solar Panel | Transceiver/Antenna Interface |
|
Type: 12V unregulated solar panels, built-in PPT for solar panel regulation Max. open circuit voltage: 32V Max. PP: 28V |
Max. cable length: 70m/229ft, single cable Connector type: TNC-QN Max. cable loss: 1.4Ω/20dB |
| Power | LAN Interface, 2-port | Bluetooth Interface |
|
DC input range: 10-32VDC |
Connector type: RJ-45, auto cross over MDI/MDI-X |
Version: 1.2 |
|
Power consumption* Standby mode: 1.2W (typical) Transmit mode: 18W (typical) During charging: 60W (max.) |
Standard: ISO/IEC 8877:1992. and IEEE 802.3 1998 edition |
Standard: Power Class 1 |
|
Connector type: 2.5/5.5mm switch craft RAPC 712 |
Max. cable length: 100m/328ft (Cat5 UTP) |
Antenna: Integrated in transceiver unit |
|
AC/DC Adapter: Input: 100-240VAC, 47-63Hz, 60W Output: 19VDC |
Data rate: 10/100Mbps |
Max. coverage* Outdoor: 100m/328ft |
|
Built-in Bluetooth handset charger: 6.2VDC, 350mA |
Max. devices connected: 7 handsets, 1 PC, etc. |
|
|
Profiles supported: Cordless handset, serial port, dial-up networking |
||
|
Frequencies: 2400.0 – 2483.5MHz |
| ISDN Interface, 2-port | Analogue Phone/Fax Interface, 2-port | USB Interface |
|
Connector type: RJ-45 Max. units pr. I/F: 8, max. total power supplied 1W |
Connector type: RJ-11 Impedance: 600Ω |
Version: 1.1, slave Connector type: B plug Max. data rate: 12Mbps Max. cable length: 5m/16.4ft |
|
Datarate: Voice: 4kbps Data: 64kbps Audio: 3.1kHz |
|
| WLAN Access Point | Certifications |
| Standard: IEEE 802.11 a/b/g |
CE FCC GMPCS |
|
Antenna: Dual space diversity antennas integrated in transceiver unit |
|
|
Max. coverage outdoor:* 100m/328ft |
|
|
Max. datarate:* 54Mbps |
| Package | Accessories |
|
EXPLORER™ 700 transceiver unit incl. lithium ion battery EXPLORER™ 700 antenna Antenna cable ISDN/LAN cable USB cable 115/230VAC power adapter Getting started kit |
Bluetooth handset and charger Antenna mounting kit Car charger cable Softbag Spare lithium ion battery |
|
Antenna cables: <5m, 3mm coax cable <30m, 5mm coax cable, <70m, 10mm coax cable |
* Performance depends on a wide range of factors and actual usage.
Datasheet (.pdf) [172 KB]